From the previous post, We have successfully booted the Cisco Virtual IOS (IOSv) included on the OnePK All-in-One Virtual Machine. Now we will build a Virtual Network for simulation using Cisco Virtual IOS (IOSv) and VMware Workstation.
Network Topology
Cisco Virtual IOS (IOSv) – VMWare Virtual Machine Configuration
R1
R2
R3
R4
Here you will see that the interfaces are all assign to bridged of the host machine which we need to change to build the network topology we wanted.
These are the steps.
Step 1: Edit Virtual Machine (Any)
Step 2. Create LAN Segments
Step 3. Assign Cisco Virtual IOS (IOSv) to the LAN Segment Created as per topology
R1-R3 Connection
R1-R2 Connection
Repeat on all the other Cisco Virtual IOS (IOSv) Interface setting to complete the topology.
Note:
- Gi0/0 – 1st Virtual IOS network Adapter
- Gi0/1 – 2nd Virtual IOS network Adapter
After completely assigning the interface on the Cisco Virtual IOS (IOSv) to its designated Segment we could now check the connectivity between Routers.
Upon checking we have confirm that its working as expected, With these we could create complex network using VMWare LAN Segment option to connect interfaces of Cisco Virtual IOS (IOSv) as we please.
// < ![CDATA[
// < ![CDATA[
// < ![CDATA[
//
[…] Building Virtual Network Lab (IOSv) […]
LikeLike